Відео

We have a Crosman 2100 that we bought new about 40 years ago. It stopped pumping so following your video we replaced the valve and seals. Pumps and fires like new. Now the bb's are rolling out the barrel. Looking for advice on this one. Thank you.

Very helpful video. My hitch did not come with an instruction manual. This video guided me perfectly. I probably fared better with the video than I would have with the manual.

New subscriber here. I've always wanted one of these jacks just to have. I love that sound, lol. I'm sure I can find a use for it. Found one, I have a 2000 FoRunna (nickname, lol) that this will be just fine for. Great vid, thank you for your time and work put into your vid! 💪🏼💪🏼

It seems that a lot of people are having a problem with the fluid product/insecticide tank leaking around the gasket and running down their back. The old style was designed much better. I had no Idea that this unit would distribute dry matter also. I replaced the gasket between the tank to no avail. I explored the internet for a remedy, no luck. It appears that the black plastic that is permanently attached to the bottom of the tank has bowed over time. I took the old gasket that didn't appear to be damaged and double stacked it with the new gasket and it slowed down the leaking considerably but not completely. I live in middle Georgia and I'm sure this machine has been left in the sun which probably attributed to the distortion of the mating face from the tank to the blower. I guess the next option would be to buy a new tank and keep it out of the sun.

@ghostses this series is outstanding. Would you like to do another one? ;) The 5.7 vortec in my 2000 express died / dieseled out in a little puff of smoke (emanating from the intake after) while just idling in the driveway the other day. I have never done a teardown or rebuild, and it is intimidating (and it is a snub nose van, to boot.. lift the body off the frame as step 1, lol). Would be a life achievement to tackle it tho.

Thank you for the video and great explanation.

Ssme transmission is on 2008 scion xb

I have a Diana 34 made in 2007 very good rifle and I have a gamo hunter 440 made in 1992 , and if I compare both shoot about the same but I’m impressed with the gamo because it’s smaller and smoother

Thanks for clear explanation

Thank you for the video! Huge help in getting it assembled! Much more Intuitive than the manual! Much appreciated!

Good luck I had this same mixer broke down first day HF kept 46.00 for Restock fee the next day

Awesome!

Hello. I know you posted this 8 years ago but you've just solved a problem I've been having with my RV brakes here in New Zealand. Thankyou very much. We just couldn't work out what the problem was. 😊

Clear, concise and to the point. Well made and extremely informative. I wish all UA-cam information videos were like this one. Well done sir.

which way do the gibs go that hold the blades (3) on a 37-290 jointer? the grove up or down?

Fyi: your barrel is turning counterclockwise... I believe your power source is in reverse polarity the barrow should be turnings clockwise....I'm seriouse your position and neg is in reverse at the source....

Thank you.

This is stolen property!

Brought to you courtesy of the CCP.

Amazing video! Exactly how informative videos need to be. How has it performed? Install a sway control on it yet?

How are the tires holding up to date? 6-18-2024 after 4 1/2 years

Is there any little stuff that you may not have recorded like the oil plug under the oil pump between the filter and thepump to go back?im rebuilding the same one i dont know of im missing any , and do you have a part number for the oil galley plugs ,thanks

This is the best demo I have ever seen, thanks a lot.

Great explanation! Thank you!

Went to the guy I buy my car tires from today to see if he could replace my garden cart wheels $40 for the tires so I went to harbor freight got them for $11.99 on sale and had him put them on my rims because those rims wouldn't fit for me as well

Video was a great help, who ever was in charge of packing the mixer is pathetic, I got 3 bags of nuts, bolts, and washers all mixed together, the amount of product received and what was required did not add up. Do yourself a favor and purchase extra before starting assembly, don't count on the instructions for help

Thank you very much wonderful video😊

I know you posted this years ago, but this is great info! Thanks for sharing your expertise!

Beautiful restore. I will be fortunate if mine turns out half as nice as yours.

Thanks a lot man

@ghostses, where can I get a new seal like you stated in the video? The small black seal that sets pressure into the tube.

Many thanks for this video. I disassembled and had a bench of old and new parts. All back together and good as new!

Thank you for such a great explanation cheers from Aussie Land

This review is 10 years old and is still great!! Thanks for posting!!

Watched them all, thank you .I own one of thee trucks and I'm about to go the same route and i know im going to be in for a lot of pain. Every time i work on it I wish I could go back to 96/97 line up every GM engineer and kick them in the nuts. It is beyond my how they could f===up something so bad. Plastic crap, spider injection in the manifold, plastic distributor and leaks, I have never owned anything that leaks like a vortec. I just changed the power steering lines well that was a treat and what is a EVO and why do I need one? when the motor comes out there will be a lot of deleting EGR EVO, O2 sensors, cats, all the useless plug in hose fittings just to name a few. I did enjoy the series and with the care and time you took I had doubt it was going to run good work

Now, that's a perfect review/tutorial! It's the only one I've found that's less than 2 years old. In fact, the majority was 3 years old or more. You've showed clearly that the Mini works as it comes now, using the right power source, angle, and pressure. The chinese did their homework. Thanks a lot for your time and great help. I'm just buying one from Ali tomorrow. All the best.

I have just purchased the 430 model and run 90 nonethanol fuel. I had to run the low jet out just a tad to stop that bog when ramping up rpms. Excellent video sir.

Just bought one of these for my camper. I’m a pretty hands on guy but this video was by far the best one I’ve watched. Great work!

Alguém tradução en português

I was about to do a tear-out. I used a wheel cleaner and now I am almost ready to refinish or paint. Thanks!

I'm almost positive that if you are not comedian Dusty Slay himself, you must be very closely related. I like your comedy (it's ok), but loved this instructional video... very helpful.

Hola me podria indicar el diametro de los rodillos de goma. Gracias

Gracias por el aporte. Excelente trabajo

Awesome explanation! Thanks so much for posting this! 👍

This is the only method that guarantees a proper compression type Knurl every time. I prefer doing a single pass if the workpiece is ridge enough.Great advice Thank you.

Thanks so much, this is the perfect informative UA-cam video. Down to the T

Loved your video, and I will give this stuff a shot. I saw another lady do this as well, with the same stuff, and it works well. I try to look for realistic honest videos, and your fits the bill. ( no flash, just facts) It came down to 2 products, I believe will work, and that's the Maquiars wheel cleaner, and Goo Gone, which has very good reviews. I'll buy both and see what works better. Your video is great, and believable. Have a question for you ? that is what should I use on the bottom of cabinets, where cooking oil etc. was stored on paper or cardboard at the bottom of cabinets. I can lift it slightly at the beginning, but don't want to get stuck halfway thru the job. Paper almost looks glued to the bottom of the cabinet. I was thinking Goo Gone, or Krud Kutter, or yes, maybe even oven cleaner. Something that would attack the grease and oils ? That oven cleaner is powerful stuff, and I've used it on many ovens. Stings. I doubt Oven cleaner would harm wood, it is powerful, but fumes, and stings hands. I'm a property owner like you, and took over the family home, and trying to get it into shape to put it up for sale. The bottom of "some" cupboards and under the sink, could be tough, but if you use the right stuff, some jobs can be easy. Thanks for this vid.

This is very helpful. Any idea why u140 cant reverse at all and has a bump in 3? I have changed the direct clutch to no avail 😕

Can i replace infeed roller without disassembling this?

If you hit the relative button on your meter, it will 0 out your resistance reading for easier measuremenis.The one that says r e l with the little triangle